The reinforcement table files are located in the following directory: \usr\cype\config. Their file extension depends on the code that has been used:

EH-91 (Spain): .n01
REBAP (Portugal): .n02
CIRSOC 201-1982 (Argentina): .n03
Dec. Min. 14 Feb 1982 (Italy): .n04
NB-1 (Brazil): .n05
ACI-318-95 (USA): .n06
ACI-318-95 (Chile): .n07
NTCRC (Mexico): .n08
EHE-98 (Spain): .n09
NBR 6118:2003 (Brazil): .n10
Eurocode 2 (Portugal): .n11
Eurocode 2: .n12
BAEL-91 (R-99) France: .n13
EHE-98-CTE (Spain): .n14
Eurocode 2 (Bulgaria): .n15
CIRSOC 201-2005 (Argentina): .n16
ACI-318M-08 (International): .n17
Eurocode 2 (Rumania): .n19
EHE-08 (Spain): .n20
ACI-318-08 (USA): .n21
Eurocode 2 (France): .n22
DIN 1045 (Germany): .n23
IS 456 (India): .n24

Different reinforcement tables have different file names. Hence, for example, for Eurocode 2:

abai0100.n12 -> Drop panel bottom reinforcement
abas0100.n12 -> Drop panel top reinforcement
losi0100.n12 -> Flat slab bottom reinforcement
loss0100.n12 -> Flat slab top reinforcement
reti0100.n12 -> Waffle slab bottom reinforcement
rets0100.n12 -> Waffle slab top reinforcement
unis0100.n12 -> Joist floor slab top reinforcement
punz0100.n12 -> Punching shear
piel0100.n12 -> Skin reinforcement
vinf0100.n12 -> Beam bottom reinforcement
vscp0100.n12 -> Beams with top assembly reinforcement and top reinforcement with hook
vscr0100.n12 -> Beams with top assembly reinforcement and top reinforcement with straight bar
vssp0100.n12 -> Beams without top assembly reinforcement and top reinforcement with hook v
ssr0100.n12 -> Beams without top assembly reinforcement and top reinforcement with straight bar
estr0100.n12 -> Beam stirrups
mo010100.n12 -> Beam assembly reinforcement
mp010100.n12 -> Beam stirrup holder reinforcement
loci0100.n12 -> Mat foundation bottom reinforcement
locs0100.n12 -> Mat foundation top reinforcement
piec0100.n12 -> Foundation beam skin reinforcement
cinf0100.n12 -> Beam top reinforcement
cscp0100.n12 -> Beams with bottom assembly reinforcement and bottom reinforcement with hook
cscr0100.n12 -> Beams with bottom assembly reinforcement and bottom reinforcement with straight bar cssp0100.n12 -> Beams without bottom assembly reinforcement and bottom reinforcement with hook
cssr0100.n12 -> Beams without bottom assembly reinforcement and bottom reinforcement with straight bar estc0100.n12 -> Foundation beam stirrups
co010100.n12 -> Foundation beam assembly reinforcement
cp010100.n12 -> Stirrup holder
ap010100.n12 -> Columns
panh0100.n12 -> Shear wall horizontal reinforcement
panv0100.n12 -> Shear wall vertical reinforcement

Explanation of the suffixes of a file:

When a special library is created and is added to the general library of the program, the last two counters are increased.

As of the 2002 version, new types of reinforcement table files were created. These files are created when the user creates his/her own reinforcement tables:

tbmenpri.tab -> Corbel main reinforcement
tbmenest.tab -> Corbel stirrups
tbvgcort.tab -> Shear in insitu joists
tbvcent.tab -> Strap beams
tbvatado.tab -> Tie beams
tbzapais.tab -> Strip and pad footing top and bottom reinforcement
tbpilot.bin -> Pile table