Columns. Unattached column at a floor with different reinforcement at each span

This occurs because the forces are obtained at the top and bottom of each span. If the moments are very different at each span, then the reinforcement will also be different. Match the reinforcement of both spans using the option Columns > Edit (within the Results tab) so this does not occur.

Top Top Top Section Go back go back

Top Top

©CYPE Ingenieros, S.A. - Avda. Eusebio Sempere, 5 - 03003 ALICANTE. Spain
Tel. USA (+1) 202 569 8902 // UK (+44) 20 3608 1448 // Spain (+34) 965 922 550 - Fax (+34) 965 124 950
Home | CYPE | Legal Aspects | Products | Versions | Downloads | Contact us
Bulgarian | French | Italian | Portuguese | Spanish | Spanish (Mexico) | Other dealerships