DXF Templates. After importing, a tiny drawing appears at the edge of the screen and the zoom orders are very slow

The drawing has its origin situated at a far distance from the coordinate origin or has very large limits. Follow the steps indicated below:

  • Check the origin coordinates of the drawing by moving the mouse cursor down to the bottom left hand corner of the drawing and read its coordinates.
  • Click on the Edit templates icon to open the Templates views manager box.
  • Click on the DXF and activate click on the Transformation icon.
  • Apply the required translation to move the drawing origin to the coordinate origin.

Top Top Top Section Go back go back

Top Top

©CYPE Ingenieros, S.A. - Avda. Eusebio Sempere, 5 - 03003 ALICANTE. Spain
Tel. USA (+1) 202 569 8902 // UK (+44) 20 3608 1448 // Spain (+34) 965 922 550 - Fax (+34) 965 124 950
Home | CYPE | Legal Aspects | Products | Versions | Downloads | Contact us
Bulgarian | French | Italian | Portuguese | Spanish | Spanish (Mexico) | Other dealerships