Can I design a different truss or frame to those offered by the program?

If the truss or frame is not one of the types included in the program, it cannot be generated.

In this case, what can be done is generate a similar one in the Portal Frame Generator and then modify it later on in Metal 3D to adapt it to the real situation.

Alternatively, it can be created completely in Metal 3D but the user will have to introduce the loads him/herself and corresponding loadcases, which are generated automatically by the Portal Frame Generator. For this reason, the first option is the better option.

Top Top Top Section Go back go back

Top Top

©CYPE Ingenieros, S.A. - Avda. Eusebio Sempere, 5 - 03003 ALICANTE. Spain
Tel. USA (+1) 202 569 8902 // UK (+44) 20 3608 1448 // Spain (+34) 965 922 550 - Fax (+34) 965 124 950
Home | CYPE | Legal Aspects | Products | Versions | Downloads | Contact us
Bulgarian | French | Italian | Portuguese | Spanish | Spanish (Mexico) | Other dealerships